Aluminium Alloy Ingots
The die-casting workhorse. Consistent Si–Cu chemistry for automotive and precision component casting.
Get in touch
Get in touch
Four product lines, one furnace discipline: aluminium alloy ingots, aluminium ingots, aluminium circles and aluminium sheets & plates.
Precision chemistries for die-casting and general engineering, cast from certified induction-melted stock and manufactured to JIS, BS, DIN, ASTM and IS standards.
The die-casting workhorse. Consistent Si–Cu chemistry for automotive and precision component casting.
High silicon, excellent corrosion resistance. Preferred for marine castings and thin-walled intricate parts.
Versatile pressure die-casting alloy balancing castability, machinability and cost efficiency.
Send us your spec sheet. We formulate, sample, certify and scale custom chemistries to your process.
| Grade | Standard | Silicon (Si) | Copper (Cu) | Typical use |
|---|---|---|---|---|
| ADC-12 | JIS | 9.6–12% | 1.5–3.5% | Die-casting, automotive |
| LM-6 | BS | 10–13% | ≤ 0.1% | Marine, thin-walled parts |
| LM-2 | BS | 9–11.5% | 0.7–2.5% | General engineering |
| LM-24 | BS | 7.5–9.5% | 3–4% | Die-casting, motor frames |
| Custom | Your spec | — | — | Formulated to order |
General-purpose commercial ingots supplied by purity grade, for foundries and fabricators who need reliable bulk aluminium without a specific casting-alloy spec.
General-purpose remelt ingots for bulk supply, secondary alloying and non-critical casting, graded by purity rather than a specific alloy chemistry.
Send us your requirement. We supply to your target purity and volume, formulated and certified to order.
| Grade | Purity | Typical use |
|---|---|---|
| Commercial | 96%–98.5% | General remelting, foundry feedstock |
| Custom | Your spec | Formulated to order |
Rolled circles across standard alloy grades for cookware, utensils, signage and general fabrication, available hot rolled or cold rolled.
High-purity, excellent formability and corrosion resistance. The standard choice for cookware and utensils.
Manganese-alloyed for higher strength with retained formability, suited to deep-drawn cookware and containers.
Cost-efficient, good surface finish. Used across utility ware, reflectors and signage applications.
Custom diameter, gauge, temper or finish, rolled to your specification and volume requirement.
| Grade | Diameter | Thickness | Typical use |
|---|---|---|---|
| 1050 / 1060 | 3"–40" | 0.70–3mm | Cookware, utensils |
| 3003 | 3"–40" | 0.70–3mm | Deep-drawn containers |
| 8011 | 3"–40" | 0.70–3mm | Signage, reflectors, utility ware |
| Custom | Your spec | Your spec | Rolled to order |
Flat-rolled sheets and plates across standard alloy grades for roofing, cladding, marine and general fabrication, supplied as coil or cut-to-length.
High formability and corrosion resistance. Suited to general fabrication, packaging and chemical equipment.
Moderate strength with good corrosion resistance. Preferred for roofing, cladding and HVAC ducting.
Higher strength and excellent weldability. The standard choice for marine fabrication and automotive panels.
Custom gauge, temper, width or finish, rolled to your specification and volume requirement.
| Grade | Thickness | Width | Typical use |
|---|---|---|---|
| 1100 | 0.7–5mm | 1000–1250mm | General fabrication, packaging |
| 3003 | 0.7–5mm | 1000–1250mm | Roofing, cladding, HVAC |
| 5052 | 0.7–5mm | 1000–1500mm | Marine, automotive, fuel tanks |
| Custom | Your spec | Your spec | Rolled to order |
Aluminium Alloy Ingots (ADC-12, LM-6, LM-2 and custom chemistries) are formulated to precise Si/Cu specifications for die-casting and general engineering. Aluminium Ingots (Commercial) are graded by purity (96% to 98.5%) rather than a specific alloy chemistry, and are used for general-purpose remelting, foundry feedstock and bulk supply.
ADC-12 has higher copper content (1.5–3.5%) alongside 9.6–12% silicon, giving strong fluidity for die-casting complex parts. LM-6 has higher silicon (10–13%) and very low iron, giving excellent corrosion resistance for marine and thin-walled castings.
Aluminium circles are supplied from 3 inches to 40 inches in diameter, with thickness ranging from 0.70mm to 3mm, to suit cookware, utensil and signage applications. Custom sizing is available on request.
Hot rolled circles are processed at high temperature for thicker gauges and faster throughput. Cold rolled circles are processed at room temperature for tighter dimensional tolerance and a smoother surface finish, typically preferred for cookware and deep-drawing applications.
Aluminium sheets and plates are supplied from 0.7mm to 5mm in thickness, across standard widths, to suit roofing, cladding, fabrication and marine applications. Custom gauge and width are available on request.
3003 is a moderate-strength, corrosion-resistant general-purpose grade suited to roofing, cladding and HVAC ducting. 5052 has higher strength and superior corrosion resistance, making it the preferred choice for marine, automotive and fuel-tank applications.
Yes. Send a specification sheet for ingots, circles, or sheets and plates, and Shubham Metal will formulate, sample, certify and scale a custom chemistry or size to your process.
Yes, Shubham Metal dispatches aluminium alloy ingots, circles, and sheets & plates to industrial buyers across India.